Skip to the main content.

Filter By Subject:

2 min read

SENS to Supply SuperTorque 8Z Genset for Wyoming Hyperscale | SENS

SENS to Supply Revolutionary SuperTorque 8Z Genset Starting System for Wyoming Hyperscale's...

1 min read

Resolving NRG Battery Faults and Charging Dead Batteries | SENS

SENS NRG 10 and 20 amp genset battery chargers are equipped with Battery Fault protection that will...

1 min read

EGSA Spotlights SENS: A Commitment to Quality & Innovation | SENS

EGSA — The Electrical Generating Systems Association — recently profiled SENS in the January /...

2 min read

SENS & ZincFive Introduce Ni-Zn Battery for Generator Starts | SENS

PORTLAND, Oregon—(May, 2022)—ZincFive®, the world leader in nickel-zinc battery-based solutions for...

3 min read

Taking Control of Your Power & Energy Requirements | SENS

William F. Kaewert, Chief Technology Officer of SENS Thesis Businesses must start planning now to...

1 min read

Step-by-Step Guide: Using the SENS Setup Utility With IQ2 Chargers | SENS

The SENS Setup Utility, already used on all of SENS’ switchmode chargers and systems, now works...

1 min read

SENS Expands Offerings with Phoenix Broadband Acquisition

SENS Expands Battery Monitoring Capabilities with Phoenix Broadband Technologies Acquisition...

2 min read

Harnessing New Technology to Empower the Power Utility Workforce | SENS

The power utility workforce is more strained than ever. New technology can help. In 2020 and...

2 min read

How to Update Firmware in MicroGenius 2 Chargers | SENS

Keeping Up To Date With any microprocessor based product, updating firmware while the product is in...

3 min read

Commissioning Guide for NiCd Batteries with MicroGenius Chargers | SENS

Application Note 26 – click here to download as .pdf Introduction This application note describes...

1 min read

How to Verify or Adjust Voltage on MicroGenius 2 Chargers | SENS

This tech tip describes how to verify the factory-set voltage range of a MicroGenius 2 battery...

4 min read

Correctly Sizing Your Engine Start Battery Charger | SENS

What is the correct output ampere rating of a battery charger used in engine-starting applications?...

1 min read

Prevent Genset Failure with Low Cranking Voltage Alarm | SENS

According to Cummins Power Generation, “Weak or undercharged starting batteries are the most common...

Navigating CA Efficiency Standards for Commercial Battery Chargers | SENS

State of California energy efficiency regulations now apply to commercial battery chargers. This...

10 min read

Why Onsite Generation is Critical Now More Than Ever | SENS

By William F. Kaewert, SENS PDF Download Introduction The demand for onsite generation has...

2 min read

Understanding & Managing NRG Remote Alarm Systems | SENS

All NRG 10 and 20 Amp genset battery chargers include five alarm relays. What does each alarm mean?...

Sign Up for SENS News and Updates!